| FABRIC SPECIFICATIONS |
| Weave |
Woven black HDPE scrim |
| Coating |
4.0 mil average each side (94 g/m2, each side) |
| Colour |
White/Black or other coloured coatings available |
| Weight |
13.0 oz/yd2 (440 g/m2) +/- 5% |
| Thickness |
24 mils (0.61 mm) ASTM D5199 |
| PERFORMANCE |
| Grab Tensile |
Warp 365 lb 1622 N |
Weft 440 lb 1956 N |
ASTM D5034-95 |
| Tongue Tear |
Warp 75 lb 333 N |
Weft 95 lb 422 N |
ASTM D2261-96 |
| Trapezoidal Tear |
Warp 70 lb 311 N |
Weft 98 lb 435 N |
ASTM D4533-04 |
| Mullen Burst |
800 psi 5520 kPa |
|
ASTM D3786-01 |
| Accelerated UV Weathering1 |
>90 % strength retention after 2000 hrs
exposure @ 0.77 W/m2/nm, or 1200 hours
exposure @ 1.35 W/m2/nm. |
ASTM G151-00
ASTM G154-04 |
 |
| 1 Q.U.V. [A-340 Lamps]: 8 hrs UV @ 60o C; 4 hrs condensation @ 50˚ C |
|
| These values are typical data and are not intended as limiting specifications. |
|
| ROLL SPECIFICATIONS |
| Cores |
4 inch (101.6 mm) or 5 inch (127 mm) I.D. |
|
| Width |
Up to 150 inches (-0 , +0.5) as ordered, 3.81 m, (-0, +12 mm) |
| Length |
Minimum 250 yds/roll (229 m); up to 1000 yds/roll (914 m) |
|
| WARRANTY |
| A 5 year limited warranty is offered on liners used in exposed applications. On fully buried installations, the limited warranty is for a period of 10 years. Contact your IPG representative for further details. |
